The Screw,close Tolerance, cataloged under National Stock Number 5305-00-150-3242, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-150-3242 |
| Primary Part Number | AIC83-8A23 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Fastener Length | 1.874 INCHES MINIMUM AND 1.921 INCHES MAXIMUM IN |
| Thread Length | 0.427 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.735 INCHES MINIMUM AND 1.814 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.720 INCHES MINIMUM AND 0.754 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 202-15522-8A23 | Howmet Global Fastening Systems Inc (USA) |
| AIC83-8A23 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| 202-15522-8A23 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| 202-15522-8A23 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| 202-15522-8A23 | 5/2 Secondary reference U.S. Government activity |
| 106334-8-23D | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| 106334-8-23D | 3/2 Design control — primary reference U.S. Government activity |
| BA45132-3A23 | 5/9 Secondary reference U.S. Government activity |
| VT1631-8-23T | 3/2 Design control — primary reference U.S. Government activity |
| BA45132-3A23 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| 202-15522-8A23 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5305-00-150-3242 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-150-3242 has 4 manufacturer part numbers on file: 202-15522-8A23 (Howmet Global Fastening Systems Inc), AIC83-8A23 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), 202-15522-8A23 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), 202-15522-8A23 (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for AIC83-8A23: Fastener Length: 1.874 INCHES MINIMUM AND 1.921 INCHES MAXIMUM IN; Thread Length: 0.427 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL; Material Document and Classification: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.