The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-138-4376, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-138-4376 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN |
| Head Height | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Fastener Length | 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN |
| Thread Length | 1.500 INCHES MINIMUM IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 13 |
| Material | STEEL COMP 304 OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.063 INCHES NOMINAL IN |
| Head Diameter | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4401B0041 | 5/9 Secondary reference U.S. Government activity |
| 4401B0041 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-138-4376 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-138-4376: Width Across Flats: 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN; Head Height: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; Fastener Length: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN; Thread Length: 1.500 INCHES MINIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.