The Setscrew, cataloged under National Stock Number 5305-00-126-5740, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-126-5740 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Head Height | 0.263 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN |
| Point Length | 0.380 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Fastener Length | 0.830 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN |
| Thread Length | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND |
| Material Document and Classification | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 90.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 416F OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Head Diameter | 0.700 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4G13440-101A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-126-5740 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-126-5740: Point Diameter: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Head Height: 0.263 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN; Point Length: 0.380 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN; Fastener Length: 0.830 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.