The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-115-1795, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-115-1795 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.063 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Fastener Length | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | 4834,FSCM 94580 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Spline Width | 0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN |
| Thread Length | 0.706 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Spline Major Diameter | 0.073 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.073 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 72 |
| Material | STEEL COMP 303 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 448483-7 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5305-00-115-1795 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-115-1795: Spline Minor Diameter: 0.063 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Fastener Length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN; Surface Treatment Document and Classification: 4834,FSCM 94580 MFR REF SINGLE TREATMENT RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.