The Setscrew, cataloged under National Stock Number 5305-00-103-2772, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-103-2772 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Head Height | 0.157 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN |
| Point Length | 0.141 INCHES NOMINAL IN |
| Fastener Length | 0.431 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| Thread Length | 0.196 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN |
| Hardness Rating | 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 18 |
| Material | COPPER ALLOY 172 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2622410 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5305-00-103-2772 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-103-2772: Point Diameter: 0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN; Head Height: 0.157 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN; Point Length: 0.141 INCHES NOMINAL IN; Fastener Length: 0.431 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.