The Screw,close Tolerance, cataloged under National Stock Number 5305-00-086-7737, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-086-7737 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 20.0 MICROINCHES GRIP |
| Head Height | 0.297 INCHES MAXIMUM IN |
| Fastener Length | 3.562 INCHES MINIMUM AND 3.594 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.373 INCHES MINIMUM AND 0.548 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.141 INCHES NOMINAL FIRST HOLE IN |
| Nominal Thread Diameter | 0.562 INCHES IN |
| Thread Direction | RIGHT-HAND |
| Grip Length | 3.046 INCHES MINIMUM AND 3.078 INCHES MAXIMUM IN |
| Grip Diameter | 0.5611 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 3.359 INCHES MINIMUM AND 3.390 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 1.016 INCHES MINIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| S2329529-56 | 5/9 Secondary reference The Boeing Company |
| S2329529-56 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-086-7737 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-086-7737: Surface Finish: 20.0 MICROINCHES GRIP; Head Height: 0.297 INCHES MAXIMUM IN; Fastener Length: 3.562 INCHES MINIMUM AND 3.594 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.