The Screw,close Tolerance, cataloged under National Stock Number 5305-00-083-3356, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-083-3356 |
| Primary Part Number | HT8138-4-17T |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.472 INCHES MINIMUM AND 1.519 INCHES MAXIMUM IN |
| Thread Length | 0.400 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.284 INCHES MINIMUM AND 1.351 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.475 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT8138-4-17T PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| HT8138-4-17T | 5/9 Secondary reference U.S. Government activity |
| 106712-4-17T | 5/2 Secondary reference U.S. Government activity |
| GB510AE4-17T | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5305-00-083-3356 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-083-3356 has 1 manufacturer part number on file: HT8138-4-17T (Howmet Global Fastening Systems Inc).
Key specifications for HT8138-4-17T: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.472 INCHES MINIMUM AND 1.519 INCHES MAXIMUM IN; Thread Length: 0.400 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.