The Screw,machine, cataloged under National Stock Number 5305-00-080-9290, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-080-9290 |
| Primary Part Number | 3MFR333CFA6-5 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Fastener Length | 0.843 INCHES NOMINAL IN |
| Thread Length | 0.406 INCHES MINIMUM IN |
| Shank Surface Treatment | PRIMER AND CADMIUM AND CHROMATE |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Surface Treatment | PRIMER |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE II |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3MFR333CFA6-5 PRIMARY | The Boeing Company Div Defense (USA) |
NSN 5305-00-080-9290 is a Screw,machine, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-080-9290 has 1 manufacturer part number on file: 3MFR333CFA6-5 (The Boeing Company Div Defense).
Key specifications for 3MFR333CFA6-5: Fastener Length: 0.843 INCHES NOMINAL IN; Thread Length: 0.406 INCHES MINIMUM IN; Shank Surface Treatment: PRIMER AND CADMIUM AND CHROMATE; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.