The Screw,machine, cataloged under National Stock Number 5305-00-079-7985, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-079-7985 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 1.766 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN |
| Thread Length | 0.573 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 8740 OR STEEL COMP 8630 |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNF |
| Head Diameter | 0.686 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24694S203 | 5/9 Secondary reference U.S. Government activity |
| MS24694S203 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-079-7985 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-079-7985: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.766 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN; Thread Length: 0.573 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN; Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.