PartsTable TECHNICAL DATA SHEET
NSN 5305-00-060-3259Government record, cited

Screw, Close Tolerance5305-00-060-3259

NSN 5305-00-060-3259 · NIIN 000603259 · Part number 8857687
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 19203
Government record, cited
NSN 5305-00-060-3259 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-060-3259. Manufacturer of record part number: 8857687.
Also searched as  5305-00-060-3259 · 5305000603259 · NIIN 000603259 · 00-060-3259 · FSC 5305 Screws · CAGE 19203 · 8857687 · NAS2803-9
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Fastener Length: 0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.338 INCHES MINIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-00-060-3259
  • NIIN: 000603259
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 8857687
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-060-3259, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-060-3259
Primary Part Number8857687
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Fastener Length0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.338 INCHES MINIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS2803 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length0.562 INCHES NOMINAL IN
Grip Diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength180000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNF
Head Diameter0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
8857687 PRIMARY Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament (USA)
Reference documents
ReferenceMeaning
NAS2803-9 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-060-3259?

NSN 5305-00-060-3259 is a Screw,close Tolerance, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-060-3259?

NSN 5305-00-060-3259 has 1 manufacturer part number on file: 8857687 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament).

What are the specifications of 8857687?

Key specifications for 8857687: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.885 INCHES MINIMUM AND 0.915 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-060-3259 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com