The Screw,machine, cataloged under National Stock Number 5305-00-059-7185, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-059-7185 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 2C STYLE |
| Screw Material | STEEL CORROSION RESISTING |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 342-0042-000 | 5/2 Secondary reference U.S. Government activity |
| MS35200-10 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-059-7185 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5925-01-688-2616. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-059-7185: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.