The Thumbscrew, cataloged under National Stock Number 5305-00-056-9384, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-056-9384 |
| Item Name | Thumbscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| Fastener Length | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY2 CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.369 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | THUMB NO. 3 |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Width Between Flats | 0.480 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS 21316-33 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| MS21316-33 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-056-9384 is a Thumbscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-056-9384: Head Height: 0.560 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN; Fastener Length: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TY2 CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.369 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.