PartsTable TECHNICAL DATA SHEET
NSN 5305-00-054-8449Government record, cited

Screw, Close Tolerance5305-00-054-8449

NSN 5305-00-054-8449 · NIIN 000548449 · Part number 7S37-5A11
The Boeing Company Div Legacy Am&m · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 43999
Government record, cited
NSN 5305-00-054-8449 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-054-8449. Manufacturer of record part number: 7S37-5A11.
Also searched as  5305-00-054-8449 · 5305000548449 · NIIN 000548449 · 00-054-8449 · FSC 5305 Screws · CAGE 43999 · 7S37-5A11
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Fastener Length: 1.047 INCHES MINIMUM AND 1.077 INCHES MAXIMUM IN
  • Thread Length: 0.349 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
  • Material Document and Classification: MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.312 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-00-054-8449
  • NIIN: 000548449
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 7S37-5A11
  • Manufacturer: The Boeing Company Div Legacy Am&m
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-054-8449, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Legacy Am&m. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-054-8449
Primary Part Number7S37-5A11
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerThe Boeing Company Div Legacy Am&m
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Fastener Length1.047 INCHES MINIMUM AND 1.077 INCHES MAXIMUM IN
Thread Length0.349 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
Material Document and ClassificationMIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.312 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
Grip Diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle100.0 DEGREES MINIMUM
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4130 OVERALL
Thread Series DesignatorUNF
Head Diameter0.441 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
7S37-5A11 PRIMARY The Boeing Company Div Legacy Am&m (USA)
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-054-8449?

NSN 5305-00-054-8449 is a Screw,close Tolerance, manufactured by The Boeing Company Div Legacy Am&m, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-054-8449?

NSN 5305-00-054-8449 has 1 manufacturer part number on file: 7S37-5A11 (The Boeing Company Div Legacy Am&m).

What are the specifications of 7S37-5A11?

Key specifications for 7S37-5A11: Surface Finish: 63.0 MICROINCHES GRIP; Fastener Length: 1.047 INCHES MINIMUM AND 1.077 INCHES MAXIMUM IN; Thread Length: 0.349 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-054-8449 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com