The Screw,machine, cataloged under National Stock Number 5305-00-054-5667, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-054-5667 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 2.516 INCHES MINIMUM AND 2.546 INCHES MAXIMUM IN |
| Screw Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS583 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP 4130 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS583-34 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-054-5667 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-054-5667: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 2.516 INCHES MINIMUM AND 2.546 INCHES MAXIMUM IN; Screw Material Document and Classification: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.