PartsTable TECHNICAL DATA SHEET
NSN 5305-00-054-4906Government record, cited

Screw, Machine5305-00-054-4906

NSN 5305-00-054-4906 · NIIN 000544906 · Part number 7S36-6A11
Sabreliner Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 0ESK8
Government record, cited
NSN 5305-00-054-4906 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-054-4906. Manufacturer of record part number: 7S36-6A11.
Also searched as  5305-00-054-4906 · 5305000544906 · NIIN 000544906 · 00-054-4906 · FSC 5305 Screws · CAGE 0ESK8 · 7S36-6A11
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Screw Surface Treatment: CADMIUM AND CHROMATE
  • Fastener Length: 1.265 INCHES NOMINAL IN
  • Screw Material Document and Classification: MIL-S-6758,D4 MIL SPEC SINGLE MATERIAL RESPONSE
  • Thread Length: 0.578 INCHES MINIMUM IN
  • Nominal Thread Diameter: 0.375 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-00-054-4906
  • NIIN: 000544906
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 7S36-6A11
  • Manufacturer: Sabreliner Corporation
General Description

The Screw,machine, cataloged under National Stock Number 5305-00-054-4906, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sabreliner Corporation. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-054-4906
Primary Part Number7S36-6A11
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
ManufacturerSabreliner Corporation
StatusACTIVE
Screw Surface TreatmentCADMIUM AND CHROMATE
Fastener Length1.265 INCHES NOMINAL IN
Screw Material Document and ClassificationMIL-S-6758,D4 MIL SPEC SINGLE MATERIAL RESPONSE
Thread Length0.578 INCHES MINIMUM IN
Nominal Thread Diameter0.375 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Screw MaterialSTEEL COMP 4130
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleTORQUE SET
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch24
Thread Series DesignatorUNF
Head Diameter0.555 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
7S36-6A11 Smith and Smith Aircraft Intl Ltd (USA)
7S36-6A11 PRIMARY Sabreliner Corporation (USA)
7S36-6A11 The Boeing Company Div Legacy Am&m (USA)
Reference documents
ReferenceMeaning
7S36-6A11 5/9 Secondary reference
Sabreliner Corp
7S36-6A11 5/9 Secondary reference
Smith and Smith Aircraft Co
7S36 REV J D/9 Drawing number reference only
The Boeing Company Div Legacy Am&m
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-054-4906?

NSN 5305-00-054-4906 is a Screw,machine, manufactured by Sabreliner Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-054-4906?

NSN 5305-00-054-4906 has 3 manufacturer part numbers on file: 7S36-6A11 (Smith and Smith Aircraft Intl Ltd), 7S36-6A11 (Sabreliner Corporation), 7S36-6A11 (The Boeing Company Div Legacy Am&m).

What are the specifications of 7S36-6A11?

Key specifications for 7S36-6A11: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.265 INCHES NOMINAL IN; Screw Material Document and Classification: MIL-S-6758,D4 MIL SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.578 INCHES MINIMUM IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-054-4906 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com