The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-050-9222, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-050-9222 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES NOMINAL IN |
| Fastener Length | 1.250 INCHES NOMINAL IN |
| Thread Length | 1.234 INCHES MINIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 130000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24667-42 | 3/2 Design control — primary reference U.S. Government activity |
| MS24667-42 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-050-9222 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-050-9222: Width Across Flats: 0.188 INCHES NOMINAL IN; Fastener Length: 1.250 INCHES NOMINAL IN; Thread Length: 1.234 INCHES MINIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.