The Screw,close Tolerance, cataloged under National Stock Number 5305-00-038-3233, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-038-3233 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.125 INCHES NOMINAL IN |
| Fastener Length | 1.125 INCHES MINIMUM AND 1.157 INCHES MAXIMUM IN |
| Thread Length | 0.297 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES NOMINAL FIRST HOLE IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | BUTTON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Grip Diameter | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.000 INCHES NOMINAL FIRST HOLE IN |
| Head Diameter | 0.500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| S2329524-18 | 5/9 Secondary reference The Boeing Company |
| S2329524-18 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-038-3233 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-038-3233: Head Height: 0.125 INCHES NOMINAL IN; Fastener Length: 1.125 INCHES MINIMUM AND 1.157 INCHES MAXIMUM IN; Thread Length: 0.297 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.076 INCHES NOMINAL FIRST HOLE IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.