The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-032-3387, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-032-3387 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.375 INCHES NOMINAL IN |
| Head Height | 0.500 INCHES NOMINAL IN |
| Fastener Length | 2.000 INCHES NOMINAL IN |
| Thread Length | 1.500 INCHES MINIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Test Data Document | 81349-MILI6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 13 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.064 INCHES NOMINAL IN |
| Head Diameter | 0.750 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Reference | Meaning |
|---|---|
| 509440-816A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-032-3387 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-053-8077. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-032-3387: Width Across Flats: 0.375 INCHES NOMINAL IN; Head Height: 0.500 INCHES NOMINAL IN; Fastener Length: 2.000 INCHES NOMINAL IN; Thread Length: 1.500 INCHES MINIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.