The Screw,close Tolerance, cataloged under National Stock Number 5305-00-031-0660, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Apcom Inc. Government technical data includes 23 specifications, cited from the U.S. Government catalog. The record lists 6 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 10 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-031-0660 |
| Primary Part Number | NAS1132-9 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Apcom Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Fastener Length | 0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1132 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN |
| Grip Diameter | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1132-9 PRIMARY | Apcom Inc (USA) |
| NAS1132-9 | Plastic and Metal Products Corporation (USA) |
| NAS1132-9 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NAS1132-9 PRIMARY | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| NAS1132-9 | Nor-Cal Supply Co (USA) |
| NAS1132-9 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| LS15234-08-9 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| NAS1132-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1132-9 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1132-9 | 5/9 Secondary reference F and C Sales Inc |
| NAS1132-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1132-9 | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1132-9 | 5/9 Secondary reference U.S. Government activity |
| NAS1132-9 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| NAS1132-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1132-9 | 5/9 Secondary reference Air Industries Co Inc |
NSN 5305-00-031-0660 is a Screw,close Tolerance, manufactured by Apcom Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-031-0660 has 6 manufacturer part numbers on file: NAS1132-9 (Apcom Inc), NAS1132-9 (Plastic and Metal Products Corporation), NAS1132-9 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), NAS1132-9 (Fastener Innovation Technology, Inc. Dba F I T), NAS1132-9 (Nor-Cal Supply Co) and 1 more.
Key specifications for NAS1132-9: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.