The Screw,machine, cataloged under National Stock Number 5305-00-018-7475, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-018-7475 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Extended Washer Thickness | 0.018 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN |
| Head Height | 0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM OR ZINC |
| Fastener Length | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-689 /CANCELLED/ FED SPEC SINGLE MATERIAL RESPONSE |
| Extended Washer Diameter | 0.375 INCHES NOMINAL IN |
| Thread Length | 0.360 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | ROUND EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 36 |
| Thread Series Designator | UNF |
| Head Diameter | 0.312 INCHES NOMINAL IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN525-8R10 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-018-7475 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-018-7475: Extended Washer Thickness: 0.018 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN; Head Height: 0.082 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM OR ZINC; Fastener Length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.