The Screw,machine, cataloged under National Stock Number 5305-00-015-9348, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-015-9348 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM OR ZINC |
| Fastener Length | 0.750 INCHES NOMINAL IN |
| Screw Material Document and Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 9C STYLE |
| Screw Material | STEEL |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 159348 | 3/9 Design control — primary reference General Motors Corp |
| FFS92TYPE3STYLE9C | 4/1 Identification reference U.S. Government activity |
| 159348 | C/1 Advisory reference — outside the item-of-supply concept General Motors Llc Dba General Motors Llc |
NSN 5305-00-015-9348 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-015-9348: Head Height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM OR ZINC; Fastener Length: 0.750 INCHES NOMINAL IN; Screw Material Document and Classification: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.