The Screw,machine, cataloged under National Stock Number 5305-00-013-0308, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-013-0308 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.062 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES |
| Thread Length | 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.099 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY MATERIAL AND SURFACE TREATMENT |
| Nondefinitive Spec/std Data | 3 TYPE AND 9C STYLE |
| Screw Material | STEEL COMP 410 OR STEEL COMP 416 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 48 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.180 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 790-011-054 | 3/2 Design control — primary reference U.S. Government activity |
| FFS92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-013-0308 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-013-0308: Head Height: 0.062 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN; Screw Surface Treatment: OXIDE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.