The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-00-009-8585, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Bsi Standards Limited. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-009-8585 |
| Primary Part Number | A102-22D |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Bsi Standards Limited |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Fastener Length | 2.700 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN |
| Thread Length | 0.407 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.339 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| A102-22D PRIMARY | Bsi Standards Limited (GBR) |
NSN 5305-00-009-8585 is a Screw,cap,hexagon Head, manufactured by Bsi Standards Limited, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-009-8585 has 1 manufacturer part number on file: A102-22D (Bsi Standards Limited).
1 possible match (shared part number, not a government interchangeability claim): 5306-01-649-1056. Verify interchangeability with system specifications before substitution.
Key specifications for A102-22D: Head Height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN; Fastener Length: 2.700 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN; Thread Length: 0.407 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.