The Screw,close Tolerance, cataloged under National Stock Number 5305-00-008-3701, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 8 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-008-3701 |
| Primary Part Number | NAS1122-9 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN |
| Fastener Length | 0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1122 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN |
| Grip Diameter | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1122-9 | Plastic and Metal Products Corporation (USA) |
| NAS1122-9 PRIMARY | Hi-Shear Corporation (USA) |
| NAS1122-9 PRIMARY | Apcom Inc (USA) |
| NAS1122-9 PRIMARY | Qualified Air Components Inc. (USA) |
| NAS1122-9 | Nor-Cal Supply Co (USA) |
| NAS1122-9 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NAS1122-9 PRIMARY | Huck International, Inc (USA) |
| NAS1122-9 PRIMARY | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| Reference | Meaning |
|---|---|
| NAS1122-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1122-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1122-9 | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1122-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1122-9 | 5/9 Secondary reference U.S. Government activity |
| NAS1122-9 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1122-9 | 5/9 Secondary reference F and C Sales Inc |
| NAS1122-9 | 5/9 Secondary reference Air Industries Co Inc |
NSN 5305-00-008-3701 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-008-3701 has 8 manufacturer part numbers on file: NAS1122-9 (Plastic and Metal Products Corporation), NAS1122-9 (Hi-Shear Corporation), NAS1122-9 (Apcom Inc), NAS1122-9 (Qualified Air Components Inc.), NAS1122-9 (Nor-Cal Supply Co) and 3 more.
Key specifications for NAS1122-9: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN; Fastener Length: 0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.