The Screw,machine, cataloged under National Stock Number 5305-00-008-2060, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-008-2060 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.827 INCHES MINIMUM AND 0.858 INCHES MAXIMUM IN |
| Screw Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4340 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.496 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 106559-4-7 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-008-2060 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-008-2060: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.827 INCHES MINIMUM AND 0.858 INCHES MAXIMUM IN; Screw Material Document and Classification: SAE ASSN STD SINGLE MATERIAL RESPONSE; Thread Length: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.