The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-007-6315, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-007-6315 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.063 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN |
| Head Height | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN |
| Fastener Length | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Spline Width | 0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN |
| Thread Length | 0.155 INCHES MINIMUM IN |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.073 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.073 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 72 |
| Material | STEEL COMP 303 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7600510-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-007-6315 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 2940-01-417-4940. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-007-6315: Spline Minor Diameter: 0.063 INCHES MINIMUM AND 0.064 INCHES MAXIMUM IN; Head Height: 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN; Fastener Length: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN; Spline Width: 0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.