The Setscrew, cataloged under National Stock Number 5305-00-007-3012, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-007-3012 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN |
| Fastener Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Thread Length | 0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | CONE |
| Nondefinitive Spec/std Data | 1 TYPE AND 2 STYLE |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 303SE OR STEEL COMP 303 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN565BC1032H10 | 5/9 Secondary reference U.S. Government activity |
| AN565BC1032H10 | 3/2 Design control — primary reference U.S. Government activity |
| AN565BC1032H10 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
NSN 5305-00-007-3012 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-007-3012: Width Across Flats: 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN; Fastener Length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN; Thread Length: 0.520 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN; Material Document and Classification: MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.