The Setscrew, cataloged under National Stock Number 5305-00-004-4925, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-004-4925 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.406 INCHES NOMINAL IN |
| Head Height | 0.156 INCHES NOMINAL IN |
| Point Length | 0.250 INCHES NOMINAL IN |
| Fastener Length | 1.562 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.146 INCHES MINIMUM IN |
| Hole Configuration Style | ROUND |
| Material Document and Classification | QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.562 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 303 OVERALL |
| Hole Quantity | 2 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.078 INCHES NOMINAL IN |
| Head Diameter | 0.438 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 69548 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-004-4925 is a Setscrew, classified under FSC 5305, Screws. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 5905-00-264-7368, 4210-01-251-9932. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-004-4925: Point Diameter: 0.406 INCHES NOMINAL IN; Head Height: 0.156 INCHES NOMINAL IN; Point Length: 0.250 INCHES NOMINAL IN; Fastener Length: 1.562 INCHES NOMINAL IN. 23 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.