The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-004-2993, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-004-2993 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Head Height | 0.324 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Fastener Length | 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.544 INCHES MINIMUM AND 0.574 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Yield Strength | 140000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 630 OVERALL |
| Hole Quantity | 6 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.063 INCHES NOMINAL IN |
| Head Diameter | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| GA3101-4H10F | 5/9 Secondary reference Globe Aerospace Inc |
| 655-620-9278 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-004-2993 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-004-2993: Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Head Height: 0.324 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN; Fastener Length: 0.615 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.