The Screw,close Tolerance, cataloged under National Stock Number 5305-00-003-7118, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-003-7118 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN |
| Head Height | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Fastener Length | 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN |
| Thread Length | 0.190 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN |
| Hardness Rating | 40.0 ROCKWELL C MINIMUM OVERALL |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN |
| Grip Diameter | 0.1313 INCHES MINIMUM AND 0.1316 INCHES MAXIMUM IN |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 630 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3012T70P01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-003-7118 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-003-7118: Width Across Flats: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN; Head Height: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN; Fastener Length: 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN; Thread Length: 0.190 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.