5301581 — CAP,DUST,PROPELLER SHAFT

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

5301581: CAP,DUST,PROPELLER SHAFT.

The CAP,DUST,PROPELLER SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL, thread_size: 2-20, overall_width: 1.000 INCHES NOMINAL IN, thread_length: 0.750 INCHES NOMINAL IN, inside_diameter: 1.935 INCHES MINIMUM AND 1.951 INCHES MAXIMUM IN, outside_diameter: 2.101 INCHES MINIMUM AND 2.117 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-530-1581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5301581

NSN: 2520-00-530-1581
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	STEEL
thread_size	2-20
overall_width	1.000 INCHES NOMINAL IN
thread_length	0.750 INCHES NOMINAL IN
inside_diameter	1.935 INCHES MINIMUM AND 1.951 INCHES MAXIMUM IN
outside_diameter	2.101 INCHES MINIMUM AND 2.117 INCHES MAXIMUM IN
special_features	R.H. THD;GRIPPING SURFACE CONDITITON-PLAIN;MATL THK 0.083 IN.;SCREW THD SERIES DESIGNATOR-NS IN
style_designator	SCREW ON
plain_hole_diameter	1.562 INCHES NOMINAL IN
end_item_identification	SLIP JOINT FELT WASHER,TRUCK
NSN	2520-00-530-1581

COMPONENT DIAGRAM

KEY FEATURES

•

PLAIN HOLE DIAMETER: 1.562 INCHES NOMINAL IN

•

THREAD LENGTH: 0.750 INCHES NOMINAL IN

•

STYLE DESIGNATOR: SCREW ON

•

OUTSIDE DIAMETER: 2.101 INCHES MINIMUM AND 2.117 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 1.935 INCHES MINIMUM AND 1.951 INCHES MAXIMUM IN

•

THREAD SIZE: 2-20

TECHNICAL CHARACTERISTICS

PLAIN HOLE DIAMETER	1.562 INCHES NOMINAL IN
THREAD LENGTH	0.750 INCHES NOMINAL IN
STYLE DESIGNATOR	SCREW ON
OVERALL WIDTH	1.000 INCHES NOMINAL IN
OUTSIDE DIAMETER	2.101 INCHES MINIMUM AND 2.117 INCHES MAXIMUM IN
INSIDE DIAMETER	1.935 INCHES MINIMUM AND 1.951 INCHES MAXIMUM IN
THREAD SIZE	2-20
SPECIAL FEATURES	R.H. THD;GRIPPING SURFACE CONDITITON-PLAIN;MATL THK 0.083 IN.;SCREW THD SERIES DESIGNATOR-NS IN
END ITEM IDENTIFICATION	SLIP JOINT FELT WASHER,TRUCK
MATERIAL	STEEL

SUBSTITUTES & CROSS-REFERENCES 4

22259VReference document

Same NSN cross-reference

Reference document — Secondary reference

803JReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

A18388Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

187826Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 5301581?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5301581?

5301581 is a CAP,DUST,PROPELLER SHAFT.

What parts can replace 5301581?

There are 4 known substitutes for 5301581: 22259V, 803J, A18388 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5301581?

5301581 is cataloged in the U.S. Government catalog under NSN 2520-00-530-1581. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5301581 — CAP,DUST,PROPELLER SHAFT

Request a Quote — 5301581