PartsTable
Technical Data Sheet
Download PDF

5300014-10BW — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5300014-10BW: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 BASE, nut_style: PLATE, nut_height: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, nut_length: 0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN, plate_width: 0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, plate_thickness: 0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-702-7917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5300014-10BW
NSN: 5310-01-702-7917
FSC: 5310 — Nuts and Washers
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 BASE
nut_stylePLATE
nut_height0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
nut_length0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
plate_width0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
plate_thickness0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
special_featuresNUT BORE DIAMETER IS 0.196 INCHES (MIN) AND 0.202 INCHES (MAX) IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE BASE
nominal_thread_size0.190 INCHES IN
mounting_hole_diameter0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
end_item_identificationEQUIPMENT SUPPORT FUS
NSN5310-01-702-7917
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5300014-10BW · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
•
NUT LENGTH: 0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BASE
•
DISTANCE FROM MOUNTING HOLE CENTER TO BASE: 0.145 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
•
PLATE WIDTH: 0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BASE
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.005 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
NUT LENGTH0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TYPE 1, CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BASE
DISTANCE FROM MOUNTING HOLE CENTER TO BASE0.145 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
PLATE WIDTH0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B221 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BASE
MATERIAL DOCUMENT AND CLASSIFICATIONNAS-8846 NATIONAL STD SINGLE MATERIAL RESPONSE LOCKING INSERT
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 2
NGN500BBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NGN500BB3-100Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5300014-10BW?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5300014-10BW?
5300014-10BW is a NUT,PLAIN,PLATE.
What parts can replace 5300014-10BW?
There are 2 known substitutes for 5300014-10BW: NGN500BB, NGN500BB3-100. Substitute compatibility should be verified for your specific system.
What is the NSN for 5300014-10BW?
5300014-10BW is cataloged in the U.S. Government catalog under NSN 5310-01-702-7917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5300014-10BW

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.