PartsTable
Technical Data Sheet
Download PDF

5300013-25ANH — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5300013-25ANH: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2219 OR ALUMINUM ALLOY 2014 OVERALL EXCEPT INSERT, nut_style: PLATE, nut_height: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, nut_length: 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, plate_width: 1.570 INCHES MAXIMUM IN, temp_rating: 300.0 FAHRENHEIT MAXIMUM DEGF. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-129-9073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5300013-25ANH
NSN: 5310-01-129-9073
FSC: 5310 — Nuts and Washers
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2219 OR ALUMINUM ALLOY 2014 OVERALL EXCEPT INSERT
nut_stylePLATE
nut_height0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
nut_length0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
plate_width1.570 INCHES MAXIMUM IN
temp_rating300.0 FAHRENHEIT MAXIMUM DEGF
thread_class2B
thread_seriesUNF
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
NSN5310-01-129-9073
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5300013-25ANH · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
NUT LENGTH: 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
DISTANCE FROM MOUNTING HOLE CENTER TO BASE: 0.250 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 1.570 INCHES MAXIMUM IN
•
TEMP RATING: 300.0 FAHRENHEIT MAXIMUM DEGF
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NUT LENGTH0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
DISTANCE FROM MOUNTING HOLE CENTER TO BASE0.250 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH1.570 INCHES MAXIMUM IN
TEMP RATING300.0 FAHRENHEIT MAXIMUM DEGF
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367,TEMPER T6 FED SPEC ALL MATERIAL RESPONSES OVERALL EXCEPT INSERT
SUBSTITUTES & CROSS-REFERENCES 6
WSI-332A-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10109551Reference document
Same NSN cross-reference
Reference document — Informative reference only
WSI-332A-25NHSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5300013-25ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
WSI-332-25DReference document
Same NSN cross-reference
Reference document — Secondary reference
WSI-332-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5300013-25ANH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5300013-25ANH?
5300013-25ANH is a NUT,SELF-LOCKING,PLATE.
What parts can replace 5300013-25ANH?
There are 6 known substitutes for 5300013-25ANH: WSI-332A-25, 10109551, WSI-332A-25NH and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5300013-25ANH?
5300013-25ANH is cataloged in the U.S. Government catalog under NSN 5310-01-129-9073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5300013-25ANH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.