PartsTable / COMPONENT / 53-3464
53-3464
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, housing_bore_diameter: 8.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-248-9507, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
53-3464
NSN: 5330-00-248-9507 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.625 INCHES NOMINAL IN housing_bore_diameter 8.250 INCHES NOMINAL IN sealing_element_style ANGULAR maximum_pressure_rating 7.0 POUNDS PER SQUARE INCH (PSI) LBS accommodated_shaft_diameter 6.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-248-9507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 53-3464
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 8.250 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 6.750 INCHES NOMINAL IN
• SEAL WIDTH: 0.625 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 8.250 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 6.750 INCHES NOMINAL IN SEAL WIDTH 0.625 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT CASE STYLE SQUARE MAXIMUM PRESSURE RATING 7.0 POUNDS PER SQUARE INCH (PSI) LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
3464 Interchangeable interchangeable cross-reference
interchangeable
112628 Interchangeable interchangeable cross-reference
interchangeable
3564-2000 Interchangeable interchangeable cross-reference
interchangeable
440593 Interchangeable interchangeable cross-reference
interchangeable
12020 Interchangeable interchangeable cross-reference
interchangeable
112C1-4 IN 150P Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 53-3464?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-3464?
53-3464 is a SEAL,PLAIN ENCASED.
What parts can replace 53-3464?
There are 14 known substitutes for 53-3464: 3464, 112628, 3564-2000 and 11 more. Substitute compatibility should be verified for your specific system.
Is 53-3464 still available?
53-3464 is currently cancelled.
Request a Quote — 53-3464