PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 53-152
53-152 ✓ Verified by PartsTable
Jumbo · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The OSCILLATOR SUBASSEMBLY is a Jumbo industrial component. Key specifications include material: STEEL OVERALL, end_style: SHORT TWISTED HOOK BOTH ENDS, nut_style: CASTELLATED, HEXAGON, nut_height: 0.453 INCHES NOMINAL IN, point_type: CONVENTIONAL, design_type: CLOSED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-227-7960, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53-152
NSN: 5310-00-227-7960
FSC: 5310
CAGE: 35301 — DRESSER INDUSTRIES INC LEROI DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSHORT TWISTED HOOK BOTH ENDS
nut_styleCASTELLATED, HEXAGON
nut_height0.453 INCHES NOMINAL IN
point_typeCONVENTIONAL
design_typeCLOSED
hook_radius0.031 INCHES NOMINAL BOTH ENDS IN
load_rating0.750 POUNDS NOMINAL LBS
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length6.125 INCHES NOMINAL IN
thread_class2B
NSN5310-00-227-7960
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 53-152 · Jumbo ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: CASTELLATED, HEXAGON
•
NUT HEIGHT: 0.453 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLECASTELLATED, HEXAGON
NUT HEIGHT0.453 INCHES NOMINAL IN
THREAD CLASS2B
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES IN
THREAD QUANTITY PER INCH20
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL OVERALL
THREAD SERIESUNF
BEARING SURFACE TYPEWASHER FACED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2410 13/16Interchangeable
interchangeable cross-reference
interchangeable
110 13/16Interchangeable
interchangeable cross-reference
interchangeable
C12229Interchangeable
interchangeable cross-reference
interchangeable
703110Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
ASME B94.19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53-152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-152?
53-152 is a OSCILLATOR SUBASSEMBLY manufactured by Jumbo.
What parts can replace 53-152?
There are 10 known substitutes for 53-152: 2410 13/16, 110 13/16, C12229 and 7 more. Substitute compatibility should be verified for your specific system.
Is 53-152 still available?
53-152 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53-152

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026