PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 53-130-1
53-130-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: F-14A AIRCRAFT A, general_characteristics_item_description: 1.000 O/A LG,0.180 IN. W IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-518-3059, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53-130-1
NSN: 5330-00-518-3059
FSC: 5330
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
end_item_identificationF-14A AIRCRAFT A
general_characteristics_item_description1.000 O/A LG,0.180 IN. W IN
NSN5330-00-518-3059
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53-130-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 3.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 7.500 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.781 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: PAPER AND GLUE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER3.500 INCHES NOMINAL IN
OUTSIDE DIAMETER7.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.781 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALPAPER AND GLUE OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER6.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
53-130-2Interchangeable
interchangeable cross-reference
interchangeable
53-130Interchangeable
interchangeable cross-reference
interchangeable
53-130-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53-130-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-130-1?
53-130-1 is a GASKET.
What parts can replace 53-130-1?
There are 3 known substitutes for 53-130-1: 53-130-2, 53-130, 53-130-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 53-130-1?
53-130-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-518-3059. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53-130-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026