PartsTable
Technical Data Sheet
53-1230 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, design_form: STRAIGHT, overall_length: 7.000 INCHES NOMINAL IN, special_features: INTERVERTEBRAL DISC; 2 MM BY 10 MM CUP-SHAPED JAWS WHICH ARE IN LINE W/SHAFT; FOR USE IN NEUROSURGICAL PROCEDURES MM, design_designation: CUSHING, part_name_assigned_by_controlling_agency: CUSHING RONGEUR 10 MM UP MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-663-7165, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53-1230
NSN: 5330-00-663-7165
FSC: 5330
CAGE: 81413 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
design_formSTRAIGHT
overall_length7.000 INCHES NOMINAL IN
special_featuresINTERVERTEBRAL DISC; 2 MM BY 10 MM CUP-SHAPED JAWS WHICH ARE IN LINE W/SHAFT; FOR USE IN NEUROSURGICAL PROCEDURES MM
design_designationCUSHING
part_name_assigned_by_controlling_agencyCUSHING RONGEUR 10 MM UP MM
NSN5330-00-663-7165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53-1230 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE: CUP
CENTER HOLE DIAMETER: 0.469 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
PERIPHERAL DIAMETER: 0.650 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
HARDNESS RATING: 40.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL: RUBBER SYNTHETIC OVERALL
COLOR: BLACK
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECUP
CENTER HOLE DIAMETER0.469 INCHES MINIMUM AND 0.479 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.650 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
HARDNESS RATING40.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
COLORBLACK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
262-198Interchangeable
interchangeable cross-reference
interchangeable
262-0198-00Interchangeable
interchangeable cross-reference
interchangeable
NL6220-001Interchangeable
interchangeable cross-reference
interchangeable
53-1230Interchangeable
interchangeable cross-reference
interchangeable
262-0198-000Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53-1230?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-1230?
53-1230 is a PACKING,PREFORMED.
What parts can replace 53-1230?
There are 5 known substitutes for 53-1230: 262-198, 262-0198-00, NL6220-001 and 2 more. Substitute compatibility should be verified for your specific system.
Is 53-1230 still available?
53-1230 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53-1230