PartsTable
Technical Data Sheet
Download PDF

53-11052-5 — NUT,PLAIN,SINGLE BALL SEAT,HEXAG

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

53-11052-5: NUT,PLAIN,SINGLE BALL SEAT,HEXAG.

NUT,PLAIN,SINGLE BALL SEAT,HEXAG. Key specifications include material: STEEL COMP 630 OVERALL, nut_style: SINGLE BALL SEAT, HEXAGON, nut_height: 1.000 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, ball_seat_radius: 1.100 INCHES MINIMUM AND 1.112 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-066-1599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53-11052-5
NSN: 5310-00-066-1599
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
nut_styleSINGLE BALL SEAT, HEXAGON
nut_height1.000 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
ball_seat_radius1.100 INCHES MINIMUM AND 1.112 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats1.250 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
bearing_surface_finish32.0 MICROINCHES
thread_quantity_per_inch14
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-066-1599
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 53-11052-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.250 INCHES NOMINAL IN
•
BEARING SURFACE FINISH: 32.0 MICROINCHES
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 1.000 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
•
BALL SEAT RADIUS: 1.100 INCHES MINIMUM AND 1.112 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.250 INCHES NOMINAL IN
BEARING SURFACE FINISH32.0 MICROINCHES
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT1.000 INCHES MINIMUM AND 1.012 INCHES MAXIMUM IN
BALL SEAT RADIUS1.100 INCHES MINIMUM AND 1.112 INCHES MAXIMUM IN
NUT STYLESINGLE BALL SEAT, HEXAGON
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 53-11052-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-11052-5?
53-11052-5 is a NUT,PLAIN,SINGLE BALL SEAT,HEXAG.
What is the NSN for 53-11052-5?
53-11052-5 is cataloged in the U.S. Government catalog under NSN 5310-00-066-1599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53-11052-5