PartsTable
Technical Data Sheet
Download PDF

53-1-2-501 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

53-1-2-501: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR, body_width: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, body_height: 0.340 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN, body_length: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE, cubic_measure: 0.038 CUBIC INCHES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-205-5213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 53-1-2-501
NSN: 5340-01-205-5213
NIINs: 012055213, 012456412
FSC: 5340 — Hardware, Commercial
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
body_styleRECTANGULAR
body_width0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
body_height0.340 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
body_length0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
cubic_measure0.038 CUBIC INCHES
document_typeCATALOG SHEET
end_item_nameEDGE CONNECTOR
document_source00779
end_item_source00779
mounting_methodTERMINAL
terminal_length0.158 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
NSN5340-01-205-5213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 53-1-2-501 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COMPONENT QUANTITY: 6
•
DOCUMENT TYPE: CATALOG SHEET
•
END ITEM SOURCE: 00779
•
COMPONENT DOCUMENT PAGE NUMBER: 13-122
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
END ITEM NAME: EDGE CONNECTOR
•
DOCUMENT SOURCE: 00779
TECHNICAL CHARACTERISTICS
COMPONENT QUANTITY6
DOCUMENT TYPECATALOG SHEET
END ITEM SOURCE00779
COMPONENT DOCUMENT PAGE NUMBER13-122
COMPONENT DOCUMENT ORIGININDUSTRIAL
END ITEM NAMEEDGE CONNECTOR
DOCUMENT SOURCE00779
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 53-1-2-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53-1-2-501?
53-1-2-501 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 53-1-2-501?
53-1-2-501 is cataloged in the U.S. Government catalog under NSN 5340-01-205-5213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53-1-2-501

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.