PartsTable
Technical Data Sheet
Download PDF

52996 — WHEEL ASSEMBLY,PNEUMATIC TIRE

✓ Government record, cited
Clementoni · TAPERED BEARING
PRODUCT OVERVIEW

52996: WHEEL ASSEMBLY,PNEUMATIC TIRE.

The WHEEL ASSEMBLY,PNEUMATIC TIRE is a Clementoni industrial component. Key specifications include material: PLASTIC LENS, disk_type: SINGLE, design_form: DISK, design_type: INTEGRAL RIM, groove_depth: 1.312 INCHES NOMINAL IN, thread_class: 2A A. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52996
NSN: 3110-00-100-3141
NIINs: 001003141, 002704727, 002782248
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialPLASTIC LENS
disk_typeSINGLE
design_formDISK
design_typeINTEGRAL RIM
groove_depth1.312 INCHES NOMINAL IN
thread_class2A A
overall_width6.000 INCHES NOMINAL IN
thread_seriesUNS
overall_length0.625 INCHES NOMINAL IN
effective_width4.938 INCHES NOMINAL IN
mounting_methodEXTERNAL THREAD
thread_diameter0.562 INCHES IN
NSN3110-00-100-3141
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 52996 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1900 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
CONE WIDTH0.7710 INCHES NOMINAL IN
SPECIAL FEATURESO.1156 IN. CHAMFER ON FRONT FACE IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1900 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
14119AReference document
Same NSN cross-reference
Reference document — Design control — primary reference
FF-B-187AReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 52996?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52996?
52996 is a WHEEL ASSEMBLY,PNEUMATIC TIRE manufactured by Clementoni.
What parts can replace 52996?
There are 2 known substitutes for 52996: 14119A, FF-B-187A. Substitute compatibility should be verified for your specific system.
What is the NSN for 52996?
52996 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52996

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.