PartsTable
Technical Data Sheet
Download PDF

52942 — CAPACITOR,FIXED,PAPER DIELECTRIC

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

52942: CAPACITOR,FIXED,PAPER DIELECTRIC.

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: COPPER OVERALL EXCEPT INSULATION, nut_style: HEXAGON, body_style: W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE, cone_width: 0.6875 INCHES NOMINAL IN, nut_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 52942
NSN: 3110-00-100-3526
NIINs: 001003526, 002090965, 008807745, 010787246, 011746543, 014433454
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialCOPPER OVERALL EXCEPT INSULATION
nut_styleHEXAGON
body_styleW/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
cone_width0.6875 INCHES NOMINAL IN
nut_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class2B
bore_diameter1.6250 INCHES NOMINAL IN
hole_diameter0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
overall_width0.365 INCHES IN
thread_seriesUNF
overall_length1.060 INCHES IN
hardness_rating121.0 BRINELL STANDARD MINIMUM
NSN3110-00-100-3526
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 52942 · Verbatim ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
80569Reference document
Same NSN cross-reference
Reference document — Secondary reference
6141280Reference document
Same NSN cross-reference
Reference document — Secondary reference
R21559Reference document
Same NSN cross-reference
Reference document — Secondary reference
019-15A12648Reference document
Same NSN cross-reference
Reference document — Secondary reference
JD8179TReference document
Same NSN cross-reference
Reference document — Secondary reference
00213-0033Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 52942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52942?
52942 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What parts can replace 52942?
There are 8 known substitutes for 52942: 80569, 6141280, R21559 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 52942?
52942 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52942

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.