PartsTable
Technical Data Sheet
Download PDF

5293221 DETAIL 26D — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5293221 DETAIL 26D: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, material_thickness: 0.050 INCHES NOMINAL IN, mounting_hole_diameter: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-292-2536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5293221 DETAIL 26D
NSN: 5340-01-292-2536
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304
overall_width0.750 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
material_thickness0.050 INCHES NOMINAL IN
mounting_hole_diameter0.125 INCHES NOMINAL IN
material_document_and_classificationQQ-S-677,CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers1.375 INCHES NOMINAL IN
center_to_center_distance_between_cup_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-01-292-2536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5293221 DETAIL 26D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-677,CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.375 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-677,CLASS 304 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL IN
OVERALL LENGTH1.750 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 304
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5293221 DETAIL 26D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5293221 DETAIL 26D?
5293221 DETAIL 26D is a RETAINER,NUT AND BOLT.
What is the NSN for 5293221 DETAIL 26D?
5293221 DETAIL 26D is cataloged in the U.S. Government catalog under NSN 5340-01-292-2536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5293221 DETAIL 26D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.