PartsTable
Technical Data Sheet
Download PDF

5291725 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5291725: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, outside_diameter: 3.734 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.219 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-200-6223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5291725
NSN: 5330-00-200-6223
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
outside_diameter3.734 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.219 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-200-6223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5291725 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 3.734 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.219 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER3.734 INCHES NOMINAL IN
APERTURE DIAMETER3.219 INCHES NOMINAL IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
A1259Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GPW9160Reference document
Same NSN cross-reference
Reference document — Secondary reference
853558Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
0040931Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
40931Reference document
Same NSN cross-reference
Reference document — Secondary reference
A50002-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 5291725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5291725?
5291725 is a GASKET.
What parts can replace 5291725?
There are 7 known substitutes for 5291725: A1259, GPW9160, 853558 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5291725?
5291725 is cataloged in the U.S. Government catalog under NSN 5330-00-200-6223. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5291725