PartsTable
Technical Data Sheet
52865 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a Clementoni industrial component. Key specifications include end_item_identification: THERMAL DYNAMICS MODEL PAK 4544 PLAZMA BURNING UNIT, general_characteristics_item_description: 3 CONTACT POINTS; 3 SPRINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-500-1783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52865
NSN: 5331-00-500-1783
FSC: 5331 — O-RING
CAGE: 77842 — EATON CORPORATION DBA EATON INOAC DIV EATON (USA)
SPECIFICATIONS
end_item_identificationTHERMAL DYNAMICS MODEL PAK 4544 PLAZMA BURNING UNIT
general_characteristics_item_description3 CONTACT POINTS; 3 SPRINGS
NSN5331-00-500-1783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 52865 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER: 28.880 INCHES MINIMUM AND 29.000 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER28.880 INCHES MINIMUM AND 29.000 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
47508X1Interchangeable
interchangeable cross-reference
interchangeable
FFB171/04J08G2EInterchangeable
interchangeable cross-reference
interchangeable
6208ZNRInterchangeable
interchangeable cross-reference
interchangeable
52865Interchangeable
interchangeable cross-reference
interchangeable
A52865Interchangeable
Same NIIN cross-reference
interchangeable
52840PC8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 52865?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52865?
52865 is a BEARING,BALL,ANNULAR manufactured by Clementoni.
What parts can replace 52865?
There are 6 known substitutes for 52865: 47508X1, FFB171/04J08G2E, 6208ZNR and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 52865?
52865 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-500-1783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52865