PartsTable
Technical Data Sheet
Download PDF

5283985 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5283985: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, slot_width: 0.406 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 1.250 INCHES NOMINAL IN, special_features: 0.406 IN. SQ HOLE IN, style_designator: CENTER MOUNT.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-528-3985, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5283985
NSN: 5340-00-528-3985
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL BAND
slot_width0.406 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width1.250 INCHES NOMINAL IN
special_features0.406 IN. SQ HOLE IN
style_designatorCENTER MOUNT
material_thickness0.1196 INCHES NOMINAL IN
loop_inside_diameter0.198 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end2.188 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end2.062 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.625 INCHES NOMINAL IN
NSN5340-00-528-3985
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5283985 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL THICKNESS: 0.1196 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.188 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.625 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END: 2.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.1196 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.188 INCHES NOMINAL IN
SPECIAL FEATURES0.406 IN. SQ HOLE IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.625 INCHES NOMINAL IN
MATERIALSTEEL BAND
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END2.062 INCHES NOMINAL IN
SLOT WIDTH0.406 INCHES NOMINAL IN
SLOT LENGTH0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5283985?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5283985?
5283985 is a CLAMP,LOOP.
What is the NSN for 5283985?
5283985 is cataloged in the U.S. Government catalog under NSN 5340-00-528-3985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5283985

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.