PartsTable
Technical Data Sheet
528063 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include overall_length: 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 0.500 INCHES MINIMUM IN, overall_diameter: 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, features_provided: HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-075-0663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
528063
NSN: 5330-00-075-0663
FSC: 5330
CAGE: 72599 — ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO (USA)
SPECIFICATIONS
overall_length0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length0.500 INCHES MINIMUM IN
overall_diameter0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
features_providedHERMETICALLY SEALED CASE
internal_configurationFIELD EFFECT
semiconductor_materialSILICON
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
terminal_circle_diameter0.100 INCHES NOMINAL IN
terminal_type_and_quantity4 UNINSULATED WIRE LEAD
power_rating_per_characteristic300.0 MILLIWATTS MAXIMUM TOTAL DEVICE DISSIPATION
NSN5330-00-075-0663
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 528063 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
528063Interchangeable
interchangeable cross-reference
interchangeable
2N4221AInterchangeable
interchangeable cross-reference
interchangeable
7933Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 528063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 528063?
528063 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 528063?
There are 3 known substitutes for 528063: 528063, 2N4221A, 7933. Substitute compatibility should be verified for your specific system.
What is the NSN for 528063?
528063 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-075-0663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 528063