PartsTable
Technical Data Sheet
Download PDF

52700-2 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

52700-2: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN, special_features: POLYPROPYLENE, style_designator: SLEEVE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-425-4713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
52700-2
NSN: 5331-00-425-4713
NIINs: 004254713, 012145499, 017172114
FSC: 5331 — O-ring
CAGE: 96341 — COBHAM ADVANCED ELECTRONIC SOLUTIONS INC. (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
special_featuresPOLYPROPYLENE
style_designatorSLEEVE
nominal_pipe_size2.0 INCHES IN
center_hole_diameter1.043 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
inlet_nominal_pipe_size_accommodated1.5 INCHES IN
part_name_assigned_by_controlling_agencySLEEVE COUPLING
NSN5331-00-425-4713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 52700-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 1.043 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
TEMP RATING-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER1.043 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 2
2-121S383-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-121Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 52700-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 52700-2?
52700-2 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 52700-2?
There are 2 known substitutes for 52700-2: 2-121S383-70, 2-121. Substitute compatibility should be verified for your specific system.
What is the NSN for 52700-2?
52700-2 is cataloged in the U.S. Government catalog under NSN 5331-00-425-4713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 52700-2