5268342: PROPELLER,FORWARD.
The PROPELLER,FORWARD is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, overall_diameter: 4.921 INCHES NOMINAL IN, surface_treatment: ANODIZE, part_name_assigned_by_controlling_agency: PROPELLER, FORWARD. This part is cataloged in the U.S.
Government catalog under NSN 2010-01-137-2013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY |
| overall_diameter | 4.921 INCHES NOMINAL IN |
| surface_treatment | ANODIZE |
| part_name_assigned_by_controlling_agency | PROPELLER, FORWARD |
| NSN | 2010-01-137-2013 |
| OVERALL DIAMETER | 4.921 INCHES NOMINAL IN |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | DIAMETRAL PITCH: 16/32; PRESSURE ANGLE: 30 DEGREES; NUMBER OF TEETH: 25; PITCH DIAMETER REFERENCE: 1.5625"; BASE DIAMETER: 1.3532"; MAJOR DIAMETER: 1.625" (NOMINAL); MINOR DIAMETER: 1.500" (NOMINAL); SPACE WIDTH MAXIMUM, ACTUAL: .1011"; SPACE WIDTH MINIMUM, EFFECTIVE: .0982"; TIF DIAMETER (FORM DIAMETER): 1.6125" MAXIMUM; PIN DIAMETER: .108"; MAXIMUM MEASUREMENT BETWEEN 2 PINS: 1.4088"; MATING PART NUMBER: 1568885 |
| SPECIAL TEST FEATURES | PROPELLER DATA: ROTATION - RIGHT HAND; NUMBER OF BLADES - 7; PITCH - VARIABLE; ALL BLADES TO BE IDENTICAL WITHIN SPECIFIED TOLERANCES; ALL DIMENSIONS AND TOLERANCES APPLY AFTER APPLICATION OF URETHANE COATING |
| SUPPLEMENTARY FEATURES | SPLINE IN ITEM 2 TO BE MACHINED AND ANODIZE PERFORMED PRIOR TO MOLDING PROCESS; ANODIZE I/A/W MIL-A-8625 TYPE II, CLASS I, SEAL IN 5% SOLUTION OF SODIUM DICHROMATE FOR 20 MINUTES MINIMUM; DIMENSIONAL LIMITS AND SURFACE ROUGHNESS DESIGNATIONS APPLY AFTER ANODIZING |
| SPECIAL FEATURES | CONSISTS OF: PLASTIC, SHEET MOLDING COMPOUND, P/N 5268344 (QTY 1); HUB, INSERT, MATERIAL: ALUMINUM ALLOY 6061-T651 SAE AMS 4128 OR AMS-QQ-A-200/8 (QTY 1); URETHANE COATING PER MIL-PRF-85285; AFTER ALL FINISHING OPERATIONS ARE COMPLETE AND BEFORE BALACING, PROTECTIVELY COAT ALL PLASTIC SURFACES USING URETHANE; URETHANE MAY BE CLEAR OR RED PER SAE AMS-STD-595 NUMBER 21105; THE COATING SHALL NOT EXCEED .001" IN THICKNESS; SEALANT ADHESION SHALL BE I/A/W ASME-D3559 EXCEPT TAPE AND PROP SURFACE SHALL NOT BE CUT OR SCORED IN ANY WAY; NO PEELING OR REMOVAL OF SEALANT SHALL OCCUR (QTY: AS REQUIRED) |
| SURFACE TREATMENT | ANODIZE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PROPELLER, FORWARD |
| MATERIAL | ALUMINUM ALLOY |
No substitute or cross-reference records for this part.