PartsTable
Technical Data Sheet
Download PDF

5267941 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5267941: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN, diameter: 0.308 INCHES MINIMUM AND 0.308 INCHES MINIMUM AND 0.309 INCHES MAXIMUM0.309 INCHES MAXIMUM IN, head_style: FLATFLAT, undercut_width: 0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN, first_end_style: RADIUSRADIUS, effective_length: 0.928 INCHES NOMINAL0.928 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-357-3973, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5267941
NSN: 5315-01-357-3973
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
height0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN
diameter0.308 INCHES MINIMUM AND 0.308 INCHES MINIMUM AND 0.309 INCHES MAXIMUM0.309 INCHES MAXIMUM IN
head_styleFLATFLAT
undercut_width0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN
first_end_styleRADIUSRADIUS
effective_length0.928 INCHES NOMINAL0.928 INCHES NOMINAL IN
special_featuresPIN HAS AN 0.075 IN. NIMINAL DIAMETER HOLE WHICH IS 0.500 IN. DEEPPIN HAS AN 0.075 IN. NIMINAL DIAMETER HOLE WHICH IS 0.500 IN. DEEP IN
style_designatorGROOVEGROOVE
under_head_length1.428 INCHES NOMINAL1.428 INCHES NOMINAL IN
undercut_diameter0.125 INCHES MINIMUM AND 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
first_hole_diameter0.093 INCHES NOMINAL0.093 INCHES NOMINAL IN
second_undercut_width0.190 INCHES NOMINAL0.190 INCHES NOMINAL IN
NSN5315-01-357-3973
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5267941 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.125 INCHES MINIMUM AND 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTERDRILLED THRU CENTER
•
UNDER HEAD LENGTH: 1.428 INCHES NOMINAL1.428 INCHES NOMINAL IN
•
FIRST END STYLE: RADIUSRADIUS
•
FIRST HOLE DIAMETER: 0.093 INCHES NOMINAL0.093 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GROOVEGROOVE
•
DIAMETER: 0.308 INCHES MINIMUM AND 0.308 INCHES MINIMUM AND 0.309 INCHES MAXIMUM0.309 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.093 INCHES MINIMUM AND 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM0.098 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.125 INCHES MINIMUM AND 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM0.130 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEDRILLED THRU CENTERDRILLED THRU CENTER
UNDER HEAD LENGTH1.428 INCHES NOMINAL1.428 INCHES NOMINAL IN
FIRST END STYLERADIUSRADIUS
FIRST HOLE DIAMETER0.093 INCHES NOMINAL0.093 INCHES NOMINAL IN
STYLE DESIGNATORGROOVEGROOVE
DIAMETER0.308 INCHES MINIMUM AND 0.308 INCHES MINIMUM AND 0.309 INCHES MAXIMUM0.309 INCHES MAXIMUM IN
EFFECTIVE LENGTH0.928 INCHES NOMINAL0.928 INCHES NOMINAL IN
HEAD STYLEFLATFLAT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5267941?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5267941?
5267941 is a PIN,GROOVED,HEADED.
What is the NSN for 5267941?
5267941 is cataloged in the U.S. Government catalog under NSN 5315-01-357-3973. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5267941

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.