PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5267796-001
5267796-001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include material: FIBER OVERALL, hole_diameter: 0.140 INCHES NOMINAL IN, shoulder_height: 0.031 INCHES NOMINAL IN, outside_diameter: 0.250 INCHES NOMINAL IN, style_designator: SHOULDERED, shoulder_diameter: 0.187 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-159-1557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5267796-001
NSN: 5310-01-159-1557
FSC: 5310
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialFIBER OVERALL
hole_diameter0.140 INCHES NOMINAL IN
shoulder_height0.031 INCHES NOMINAL IN
outside_diameter0.250 INCHES NOMINAL IN
style_designatorSHOULDERED
shoulder_diameter0.187 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
NSN5310-01-159-1557
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5267796-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: FIBER OVERALL
•
SHOULDER HEIGHT: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
•
HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.187 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALFIBER OVERALL
SHOULDER HEIGHT0.031 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
HOLE DIAMETER0.140 INCHES NOMINAL IN
SHOULDER DIAMETER0.187 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
4698Interchangeable
interchangeable cross-reference
interchangeable
LTA-360Interchangeable
interchangeable cross-reference
interchangeable
4698-1Interchangeable
interchangeable cross-reference
interchangeable
973-0224Interchangeable
interchangeable cross-reference
interchangeable
6520NCM071816Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5267796-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5267796-001?
5267796-001 is a WASHER,SHOULDERED.
What parts can replace 5267796-001?
There are 5 known substitutes for 5267796-001: 4698, LTA-360, 4698-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5267796-001?
5267796-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-159-1557. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5267796-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026